Tri-CAN and Quad-CAN Sensors

The Thermometrics Combination Sensor is an intelligent combination intake manifold sensor capable of providing up to five measurements including manifold moisture, manifold temperature, manifold pressure, atmospheric pressure and atmospheric temperature. The sensor is designed for transportation applications that require highly accurate and reliable measurements, typically within the intake duct. The unique technology of the sensor design provides unmatched accuracy in the marketplace.

Characteristic：

  • Operating Temperature Range: -40°C~125°C
  • Pressure range: 30 psi
  • Relative Humidity: 0 to 100%
  • Supply Voltage: 12 or 24 VDC Typical
  • Current consumption: 14mA Typical
  • Highly accurate temperature, pressure and humidity sensing elements
  • CAN2.0 communication standard J1939
  • Mating connector: BOSCH1928403736
  • RoHS compliant
  • Customizable connectors and mounting

Appliance：

  • Heavy Duty Diesel
  • Road Vehicle Applications
  • Construction Vehicle Applications
  • Generator Equipment

Attached Image：

Ordering Model：

Part Number                            Standard                                                                                                                                            

GE-2075                                 Quad-Can       

GE-2092                                  Tri-Can

 

Similar Posts

Duct Temperature Sensors

NTC thermistor assemblies with hermetically sealed, ruggedized housings for mounting in fluids or air streams, which provide accurate temperature measurements. Characteristic： Accuracy: Resistance value at 25.0℃ 29.7~30.2K0 31.0℃ resistance value 23.0~23.3KQ Resistance value at 37.0℃17.9~18.1K9 Dielectric strength: wire core and probe, wire insulation between experience 1500V/50Hz0.5mA, the time duration of the voltage withstand test shall…

T6753 Automotive CO2 Sensor

The Telaire Carbon Dioxide (Co2) Sensor for Vehicles is a Non-Dispersive Infrared (NDIR) carbon dioxide sensor that implements a single-channel diffuse sampling method for automotive HVAC applications, including automatic fresh air control and safety detection alarms for carbon dioxide refrigerants. Together with the patented ABC LogicTM lifetime calibration guarantee, its low power consumption, compact design…

Outdoor Air Temperature Sensor

Thermometrics Outside Air Temperature (OAT) sensors measure the temperature outside the passenger compartment and are usually mounted in or near the front bumper or in the side mirrors. The sensor transmits the outside air temperature to the controller of the automatic HVAC system. The controller uses this temperature to help control the vehicle’s interior temperature….

Coolant Temperature Sensor

The Coolant Temperature Sensor monitors the coolant temperature used to cool the EV/PHEV battery module. The sensor’s function is to communicate battery overheating conditions to the Battery Management System (BMS). The vehicle system uses this information to control battery charging and overheating to prevent damage to the battery. Characteristic： Operating temperature range: -40°C ~ 130°C…

Oil Pressure Sensors

The NOVA oil pressure sensor utilizes the same MEMS backside pressure technology as all Harsh Media pressure sensors. Measures engine oil pressure, outputs a signal to the ECU, which is then displayed on the oil pressure gauge; if the oil pressure of the engine lubricant is too low, the ECU will alarm and take control…

Digital Pressure Sensors

All Sensors manufactures ultra-low, low, and medium pressure transducers that offer accuracy and highly repeatable performance, providing our customers with best-in-class, quality transducer solutions. These calibrated and compensated sensors provide accurate, stable output over a wide temperature range. The series is suitable for use with non-corrosive, non-ionic working fluids such as air, dry gases, etc….