Transmission Oil Temperature Sensor

Transmission Fluid Temperature Sensors are used in automotive applications to monitor the temperature of the transmission fluid and provide feedback to prevent the transmission from overheating, which would otherwise cause performance and reliability issues.

Characteristic：

  • Working pressure range:0 Bar～20 Bar
  • R@100℃:183Ω±2%
  • Sealing specification: Leakage rate is <0.5% when exposed to 20Bar oil pressure for 1 minute.
  • Response time: T63<15s(25℃~85℃in Oil)
  • Chemical Compatibility: Automatic Transmission Fluid
  • Compliance: RoHS
  • Other suitable RvT curves available on request

Appliance：

  • Automotive Automatic Transmission Fluid Temperature Monitoring
  • Fluid Temperature Monitoring

Attached Image：

Ordering Model：

Part Number            CTTS-301823–F01

@100℃                       183Ω±2%

 

Similar Posts

Duct Air Temperature Sensor

The Thermometrics Duct Temperature Sensor is a temperature sensor that can be used to determine the temperature of a wide range of gas flow fields. the NTC in the protective probe, along with the built-in thermal grease provides an optimal solution for heat transfer with fast time response. Suitable for a wide range of applications…

Combined Pressure + Temperature Sensors

The combination sensor provides separate analog pressure and temperature output signals and is designed for vehicle transportation applications to reduce size and cost. The combination sensor is used for liquid and gas condition monitoring and is suitable for temperatures up to +1350C. Characteristic： Operating Temperature Range: -40℃~135℃A Zone Supply Voltage: 5±0.25VDC Supply current: <10mA Temperature…

Outdoor Air Temperature Sensor

Thermometrics Outside Air Temperature (OAT) sensors measure the temperature outside the passenger compartment and are usually mounted in or near the front bumper or in the side mirrors. The sensor transmits the outside air temperature to the controller of the automatic HVAC system. The controller uses this temperature to help control the vehicle’s interior temperature….

MA100 Series Temperature Sensors (NTC)

The Ma100 series of NTC precision thermistors offer tight interchangeable tolerances, small size, and fast response times for intermittent and continuous temperature monitoring. The products are assembled in small packages that can be inserted into conduit or other small enclosures. Characteristic： Compatible with 400 Series Interchangeability/accuracy of ±0.05°C to 0.15°C Small size, fast response, MA100BF:…

Duct Temperature Sensors

NTC thermistor assemblies with hermetically sealed, ruggedized housings for mounting in fluids or air streams, which provide accurate temperature measurements. Characteristic： Accuracy: Resistance value at 25.0℃ 29.7~30.2K0 31.0℃ resistance value 23.0~23.3KQ Resistance value at 37.0℃17.9~18.1K9 Dielectric strength: wire core and probe, wire insulation between experience 1500V/50Hz0.5mA, the time duration of the voltage withstand test shall…