NTC flue gas sensor with built-in capacitance for reducing measurement errors.
Wilcoxon offers a wide range of mounting bases and accessories for both permanent and temporary transducer installations. The assessment of each transducer mounting location must be based on the vibration source of the particular equipment to be monitored, and the mounting configuration is largely dependent on dynamic measurement requirements such as frequency and amplitude ranges….
Characteristic： More accurate: Distance measurement accuracy is ±2.5% of the full range span of the distance. More Reliable: Fluid-TracB is non-contact. Resistive float sensors, on the other hand, have a wiper that slides over the resistive strip, which can wear out over time, resulting in intermittent or complete loss of signal. Non-Invasive: Fluid-TracR mounts in…
Type 95 NTC thermistors are interchangeable thermistors protected with an epoxy resin coating and are available with a choice of three wire types, bare tinned copper, bare tinned alloy, or PTFE insulated wire. They are suitable for temperature measurement, control, and compensation in the -112 °F to 302 °F (-80 °C ~ 150 °C) range…
The platinum resistance PT100 is a commonly used temperature sensor that has a resistance value of 100 ohms at 0°C and increases uniformly as the temperature rises. The design principle of this sensor is based on the rate of change of resistance of the metal platinum under temperature change. The industrial principle is that the…
The Telaire Carbon Dioxide (Co2) Sensor for Vehicles is a Non-Dispersive Infrared (NDIR) carbon dioxide sensor that implements a single-channel diffuse sampling methodology for automotive HVAC applications, including automatic fresh air controls and safety detection alarms for carbon dioxide refrigerants. Together with the patented ABC LogicTM lifetime calibration guarantee, its low power consumption, compact design…
The combination sensor provides separate analog pressure and temperature output signals and is designed for vehicle transportation applications to reduce size and cost. The combination sensor is used for liquid and gas condition monitoring and is suitable for temperatures up to +1350C. Characteristic： Operating Temperature Range: -40℃~135℃A Zone Supply Voltage: 5±0.25VDC Supply current: <10mA Temperature…
