High Temperature Accelerometers

The HT series provides excellent long-term stable performance in 150°C environments with components designed to withstand continuous high operating temperatures. For more extreme temperatures, the 376 can be used with the CC701HT external charge amplifier up to a maximum operating temperature of 260°C. The 376 can be used with the CC701HT external charge amplifier up to a maximum operating temperature of 260°C.

Characteristic：

  • 150°C operating temperature, up to 260°C
  • Sensitivity: 500mV/g, ±5% tolerance
  • Stable temperature response (-50℃~150℃)
  • Ultra-low electrical noise
  • High performance ceramic, shear mode
  • Reverse connection protection
  • Hermetically sealed, soldered, internally shielded

Appliance：

  • High Temperature Equipment Vibration Monitoring
  • Equipment Condition Monitoring
  • Condition monitoring of rotating equipment
  • Monitoring of motors, gears, fans, pumps, etc.
  • Harsh environment applications

Attached Image：

Ordering Model：

HT786A

HT780A

HT787

376/CC701HT

 

Similar Posts

EGR Temperature Sensor

Exhaust Gas Recirculation (EGR) temperature sensors are EGR systems for gasoline or diesel engines. In a closed EGR system, a portion of the exhaust gases are recirculated, cooled and mixed with the intake air into the engine cylinders. This technology is used to reduce the amount of NOx (Nitrogen Oxides) produced during the combustion process…

Vibration Temperature Dual Output Accelerometers

Dual Output Accelerometers for simultaneous vibration and temperature measurements are available in 100mV/g and 500mV/g sensitivities and a wide frequency range, simplifying your monitoring setup by allowing more data to be measured with a single sensor. Characteristic： Dual output for vibration and temperature Sensitivity: 100mV/g,500mV/g Tolerance ±5% Stable temperature response (-50℃~120℃) Ultra-low electrical noise High…

Outdoor Air Temperature Sensor

Thermometrics Outside Air Temperature (OAT) sensors measure the temperature outside the passenger compartment and are usually mounted in or near the front bumper or in the side mirrors. The sensor transmits the outside air temperature to the controller of the automatic HVAC system. The controller uses this temperature to help control the vehicle’s interior temperature….

Oil Pressure Sensor (OPS)

Our Oil Pressure Sensor OPS measures oil pressure in transmissions such as electric vehicles to optimize engine power. It is designed to measure the absolute pressure in the transmission housing and is robust enough to be used in oil. The electronic unit with digital output signal (SENT) transmits the measurement results accurately, safely and quickly….

NPC100/120 Series Pressure Sensors (MEMS)

The NPC-100 series of disposable medical pressure transducers are designed for single-use medical applications. The devices are compensated and calibrated in accordance with industry-recognized guidelines from the American Association for the Advancement of Medical Instrumentation (AAMI). The sensors integrate a high-performance pressure sensor chip with temperature compensation circuitry and gel protection in a small, low-cost…

MA100 Series Temperature Sensors (NTC)

The Ma100 series of NTC precision thermistors offer tight interchangeable tolerances, small size, and fast response times for intermittent and continuous temperature monitoring. The products are assembled in small packages that can be inserted into conduit or other small enclosures. Characteristic： Compatible with 400 Series Interchangeability/accuracy of ±0.05°C to 0.15°C Small size, fast response, MA100BF:…