Exhaust Air Temperature Sensor

The Thermoetrics GE-2142 HVAC Duct Temperature Sensors are OEM solutions for measuring air temperature in ventilation ducts. These sensors provide a signal output that is proportional to the duct air temperature. This signal is used as an input to the controller, which parses the signal and adjusts the output accordingly.

Characteristic：

  • Operating Temperature Range: -40°C~135°C
  • Connector System: Aptiv Metri-Pack 150 Unsealed
  • Mating connector: Aptiv P/N12047662
  • Shell: Nylon 6/6
  • Response Time: <5 Seconds (in Oil)
  • Existing market-proven design
  • High accuracy, long term stability
  • Twist lock mounting
  • Open temperature sensing element design for fast time response
  • RoHS compliant
  • RvT curves can be selected according to customer requirements

Appliance：

  • Automotive HVAC Duct Temperature
  • Automotive Cabin Temperature
  • Industrial Air Temperature
  • Industrial HVAC Airflow Temperature Monitoring
  • Industrial Automated Outside Temperature and Process Temperature Monitoring

Attached Image：

Ordering Model：

Part Number                                 @25℃

A-2142                             2.795KQ±2.5%,4073K       

 

Similar Posts

Refrigerant Temperature Sensor

Automotive refrigerant temperature sensors measure the refrigerant temperature on the high pressure side and low pressure side of the air conditioning system. The temperature sensor is used to detect the operating temperature of the air conditioning system to determine the operating condition and potential malfunction of the air conditioning system. Characteristic： Operating Temperature Range: -40°C~130°C…

HART Protocol Accelerometers

The PCH420V series speed sensors provide 4-20 mA output with the added feature of digital communication via the HARTQ7.0 protocol.The HART feature allows for field configuration of three separate vibration bandwidths, multipoint installations, and infrastructure with direct connection to existing plants that use the HART protocol. Characteristic： Vibration output 4-20mA loop RMS, Peak, True peak…

Dual Zone Sunshine Sensor

The Thermometrics Dual Zone Sunlight Microlight Sensor is mounted in the instrument panel (IP panel) near the front window. It uses two internal photodiode cells to measure the intensity of light entering the vehicle cabin. The sensor then feeds this information to the Automatic Temperature Control (ATC) unit of the vehicle’s air conditioning system. The…

Temperature Compensated Analog mV Pressure Sensors

All Sensors manufactures ultra-low, low, and medium pressure transducers that offer accuracy and highly repeatable performance, providing our customers with best-in-class, quality transducer solutions. These calibrated and compensated sensors provide accurate, stable output over a wide temperature range. The series is suitable for use with non-corrosive, non-ionic working fluids such as air and dry gases….

Fluid Temperature Sensors – Hose Clamps

A clamp temperature sensor monitors the temperature of the fluid flowing through the pipe. The system control module receives this temperature reading and uses the control loop to control the overall system temperature. Characteristic： Easy to install galvanized spring steel spring clamp High sensitivity temperature measurement Compact design Connector Position Assurance (CPA) Vw75174 Approved Connector…