E-Motor Coil Temperature Sensor

The A-1737 Motor Coil Temperature Sensor provides critical temperature feedback on motor operating conditions. Used by inserting into the stator coil or connecting to the neutral bus on the motor circuit, it provides temperature feedback to indicate motor load or stall conditions. Under motor overload or stall conditions, the current in the coil or bus increases. The increase in current generates heat in the system, which is measured by the sensor. By knowing the temperature conditions, the system can prevent damage to the motor system.

Characteristic：

  • Operating Temperature Range: -40°C to 210°C
  • Response time: T63<7s
  • Axial Leaded Glass NTC Thermistors
  • Molex terminals
  • Meets harsh automotive environmental conditions
  • Assembly component materials rated up to 210°C
  • Abrasion resistant sleeving for wire protection in applications
  • Other suitable RvT curves available on request

Appliance：

  • EV/HEV Motor Protection
  • Starter/Generator Motor Protection
  • Industrial Motor/Generator Protection
  • Traction Motor Protection

Attached Image：

Ordering Model：

Part Number：               A-1737

Standard：               @25℃30KQ±5%

 

Similar Posts

ZTP148 Series Temperature Sensors (NTC)

The ZTP-148SR infrared (IR) sensor consists of a thermal element, IR filter, and thermistor for temperature compensation, all packaged in a hermetically sealed TO-46(18) metal header. A variety of filters are available to maximize performance in specific applications. Thermopile infrared sensors are used for non-contact surface or infrared temperature measurement. Characteristic： Compact Design High sensitivity…

Temperature Compensated Analog mV Pressure Sensors

All Sensors manufactures ultra-low, low, and medium pressure transducers that offer accuracy and highly repeatable performance, providing our customers with best-in-class, quality transducer solutions. These calibrated and compensated sensors provide accurate, stable output over a wide temperature range. The series is suitable for use with non-corrosive, non-ionic working fluids such as air and dry gases….

FCC CCS/FDC CCS

The CCS busbar is the key connection between the battery and the BMS (Battery Management System). It consists of an information acquisition module, a plastic structural member and a copper-aluminum busbar, which are integrated into a single unit through riveting and other processes. Its main functions include the realization of high-voltage series-parallel connection of battery…

Digital Pressure Sensors

All Sensors manufactures ultra-low, low, and medium pressure transducers that offer accuracy and highly repeatable performance, providing our customers with best-in-class, quality transducer solutions. These calibrated and compensated sensors provide accurate, stable output over a wide temperature range. The series is suitable for use with non-corrosive, non-ionic working fluids such as air, dry gases, etc….

NTC Flue Gas Temperature Sensors

NTC flue gas sensor with built-in capacitance for reducing measurement errors. Characteristic： Operating temperature: -20 to 155 degrees Celsius (sensor probe), -20 to 125 degrees Celsius (seal section) Temperature Accuracy: B25/85:3977K±0.75 Optional Connector: Optional Design Address: Taunton Production address: CZ NTC sensor with built-in capacitor for flue gas measurement Appliance： For industrial flue gas measurements…