Direct Coolant Temperature Sensors

The Thermometrics Direct Flow Temperature Sensor monitors the temperature of the fluid flowing through it, reading and controlling the temperature control required by the whole system through the corresponding control unit. It can be used to monitor engine temperatures, heater temperatures, industrial supply temperatures and more.

Characteristic：

  • Operating Temperature Range: -40°C~120°C
  • USCAR Sealed Connector System
  • Mating connector: Molex 31403-2100 or 31403-2110
  • Compact design
  • High accuracy and long term stability
  • Extremely fast response
  • RoHS compliant
  • RvT curves can be selected according to customer requirements
  • Parts available for four standard hose sizes

Appliance：

  • Battery Module Coolant Temperature
  • Engine coolant temperature
  • Transmission Fluid Temperature
  • Industrial Temperature Monitoring

Attached Image：

Ordering Model：

Part Number                                 Standard                                                                                                                                           

GE-1935                       R@25°℃:10KQ±1.5%,12,3/4″Hose       

GE-2102                       R@25°℃:10KQ±1.5%,8,1/2″Hose

GE-2103                       R@25°℃:10KQ±1.5%,20,1 %4″Hose

CTTS-302651-F01        R@25°℃:10KQ±1.5%,16 Hose

 

Similar Posts

Dual Zone Sunshine Sensor

The Thermometrics Dual Zone Sunlight Microlight Sensor is mounted in the instrument panel (IP panel) near the front window. It uses two internal photodiode cells to measure the intensity of light entering the vehicle cabin. The sensor then feeds this information to the Automatic Temperature Control (ATC) unit of the vehicle’s air conditioning system. The…

Filtered Air Restriction Sensors

To improve the performance of air filtration systems, the NovaSensor FMA Series Filtered Air Restriction (FAR) sensors utilize high-precision NPA silicone piezoresistive technology to accurately measure pressure loss in a variety of air filtration units in a small form factor that is easy to install and maintenance-free.The FAM series features configurable thresholds that allow it…

Repeatable Temperature Sensors

NTC thermistor assemblies are designed with tight interchangeable tolerances and rugged, reusable construction for intermittent and continuous patient temperature monitoring. Characteristic： Product Prefix: MA300, MA400, A468, CPO302915 Nozzle Style: 0.38” OD metal disk 0.150” OD Molded Cap (Ma400) 0.200” OD Molded Cap (Ma400) “400 Series”, R25=2252 Ohms, Features Interchangeability to ±0.05°C @ +37°C – Temperature…

EGR Temperature Sensor

A-1758 EGR temperature sensors are available in 150° C and 300° C temperature versions. They are used to monitor the temperature at several locations in the diesel engine as part of the engine control strategy. The high temperature sensor is used for the exhaust gas and the low temperature sensor is used for the intake…

Helicopter Accelerometers

Designed for helicopter condition monitoring, the HA series is a high stability accelerometer utilizing high reliability piezoelectric ceramic elements and low noise processing circuitry to provide either a 20mV/g or 40 mV/g sensitivity acceleration output, or a vibration velocity output. Features include ±5% sensitivity tolerance, top outlet, 3-pin MIL-C-26482 type connector, rugged 316L stainless steel…