Coolant Temperature Sensor

A coolant temperature sensor monitors the temperature of the coolant that is pumped around the engine block to cool the engine. The purpose of this sensor is to notify the driver of the vehicle at the first sign of engine overheating. The purpose is to warn the driver of overheating engine temperatures so that the driver can stop and shut down the engine in time before the engine is permanently damaged by overheating.

Characteristic：

  • Operating temperature range: -40° C to 150° C
  • Response time: 5 seconds from 20° C to 100° C in water
  • Sensor Connector: E02FGY-R
  • Temperature Accuracy: ±1.23°@25°℃ -Existing market-proven design
  • High accuracy, long term stability
  • Extremely fast response
  • RoHS compliant
  • Suitable RvT curves can be selected according to customer requirements

Appliance：

  • Battery Module Coolant Temperature
  • Engine coolant temperature
  • Transmission Fluid Temperature
  • Industrial Temperature Monitoring

Attached Image：

Ordering Model：

Part Number：               A-1799 150℃

Standard：                R@25℃:  21290±4.87%

 

Similar Posts

Harsh Media Pressure Sensor

The NOVASensor NPR-101 pressure sensor is a silicon-based MEMS device utilizing “backside absolute pressure” technology designed for harsh media exposure, eliminating direct contact between the sensing circuitry and the application media. The device is coupled with an ASIC to provide a ratiometric output proportional to the applied pressure. Integrated diagnostics are included. Characteristic： Operating Pressure…

Fast Response NTC Sensors

Thermometrics FP Series Glass-Coated Fastip Probe NTC Thermistors consist of smaller diameter glass-coated thermistor beads with shock-resistant glass rods that are hermetically sealed at the tip. These units are rugged and unaffected by severe environmental exposures, including high density nuclear radiation. The FP Series Fastip thermistor probes are ideally suited for high-speed measurement and control…

Duct Temperature Sensors

NTC thermistor assemblies with hermetically sealed, ruggedized housings for mounting in fluids or air streams, which provide accurate temperature measurements. Characteristic： Accuracy: Resistance value at 25.0℃ 29.7~30.2K0 31.0℃ resistance value 23.0~23.3KQ Resistance value at 37.0℃17.9~18.1K9 Dielectric strength: wire core and probe, wire insulation between experience 1500V/50Hz0.5mA, the time duration of the voltage withstand test shall…

Helicopter Accelerometers

Designed for helicopter condition monitoring, the HA series is a high stability accelerometer utilizing high reliability piezoelectric ceramic elements and low noise processing circuitry to provide either a 20mV/g or 40 mV/g sensitivity acceleration output, or a vibration velocity output. Features include ±5% sensitivity tolerance, top outlet, 3-pin MIL-C-26482 type connector, rugged 316L stainless steel…

Vibration Temperature Dual Output Accelerometers

Dual Output Accelerometers for simultaneous vibration and temperature measurements are available in 100mV/g and 500mV/g sensitivities and a wide frequency range, simplifying your monitoring setup by allowing more data to be measured with a single sensor. Characteristic： Dual output for vibration and temperature Sensitivity: 100mV/g,500mV/g Tolerance ±5% Stable temperature response (-50℃~120℃) Ultra-low electrical noise High…

Intelligent Transmitters

The IT Series Intelligent Vibration Transmitters measure and process dynamic vibration signals to produce a 4-20 mA output signal. The transmitters provide an easy way to connect standard IEPE vibration sensors to a PLC, DCS or SCADA system. The inputs to the transmitter provide power and measure signals for accelerometers, piezoelectric velocity sensors, or dual…