Coolant Temperature Sensor

Thermometrics Outside Air Temperature (OAT) sensors measure the temperature outside the passenger compartment and are usually mounted in or near the front bumper or in the side mirrors. The sensor transmits the outside air temperature to the controller of the automatic HVAC system. The controller uses this temperature to help control the vehicle’s interior temperature….

The Telaire Carbon Dioxide (Co2) Sensor for Vehicles is a Non-Dispersive Infrared (NDIR) carbon dioxide sensor that implements a single-channel diffuse sampling method for automotive HVAC applications, including automatic fresh air control and safety detection alarms for carbon dioxide refrigerants. Together with the patented ABC LogicTM lifetime calibration guarantee, its low power consumption, compact design…

Wilcoxon’s range of high performance accelerometers have a high MTBF to ensure long term stability and lower sensitivity tolerances for more accurate measurements. The accelerometers have a wide frequency range and are suitable for routine monitoring of rotating machinery. These sensors are used to detect rotating equipment failures between 30 and 60,000 CPM and to…

The NPC-100 series of disposable medical pressure transducers are designed for single-use medical applications. The devices are compensated and calibrated in accordance with industry-recognized guidelines from the American Association for the Advancement of Medical Instrumentation (AAMI). The sensors integrate a high-performance pressure sensor chip with temperature compensation circuitry and gel protection in a small, low-cost…

Transmission Fluid Temperature Sensors are used in automotive applications to monitor the temperature of the transmission fluid and provide feedback to prevent the transmission from overheating, which would otherwise cause performance and reliability issues. Characteristic： Working pressure range:0 Bar～20 Bar R@100℃:183Ω±2% Sealing specification: Leakage rate is <0.5% when exposed to 20Bar oil pressure for 1…

The Coolant Temperature Sensor monitors the coolant temperature used to cool the EV/PHEV battery module. The sensor’s function is to communicate battery overheating conditions to the Battery Management System (BMS). The vehicle system uses this information to control battery charging and overheating to prevent damage to the battery. Characteristic： Operating temperature range: -40°C ~ 130°C…