Hazardous Area Sensors

Type SC epoxy encapsulated interchangeable thermistors are high precision NTCs protected by a bushing with nickel conductors in a high density insulating jacket. They provide accurate temperature measurement, control, and compensation over the -40° C to 105° C (-40° F to 221 ° F) range, with sensitivity greater than -4%/°C at 25° C (77 °…

Ultra-high sensitivity seismic sensors are the recognized standard for ultra-low-frequency monitoring, with high sensitivity response in excess of 10 V/g and ultra-low frequency response. Ultra-low electrical noise provides acceleration measurements of less than ug, making them suitable for applications such as seismic detection systems and structural monitoring, construction zone observation, and vibration monitoring of vibration…

The evaporator temperature sensor is used to measure the evaporator core temperature. The evaporator cools the refrigerant in the HVAC system. Since the evaporator core operates at temperatures very close to 0°C, it is important to have an accurate and reliable thermistor to measure its temperature to prevent core freezing. Core freezing can cause expensive…

The Urea Sensor Assembly TULC integrates temperature, ultrasonic level and quality sensors (optional), which utilize ultrasonic reflective technology to measure the level and percentage of the urea solution, which is thermally welded to the bottom of the urea tank, as well as being available as a stand-alone sensor solution for system suppliers and end customers….

The CCS busbar is the key connection between the battery and the BMS (Battery Management System). It consists of an information acquisition module, a plastic structural member and a copper-aluminum busbar, which are integrated into a single unit through riveting and other processes. Its main functions include the realization of high-voltage series-parallel connection of battery…

The IT Series Intelligent Vibration Transmitters measure and process dynamic vibration signals to produce a 4-20 mA output signal. The transmitters provide an easy way to connect standard IEPE vibration sensors to a PLC, DCS or SCADA system. The inputs to the transmitter provide power and measure signals for accelerometers, piezoelectric velocity sensors, or dual…